FujiFilm ED-580XT, Руководство по эксплуатации

Страница: 19 / 136

897N200877B
1-7
Chapter 1
Precautions
1.11 Electromagnetic Compatibility (EMC)
This product generates, uses and can radiate electromagnetic energy. To prevent
electromagnetic interference within the vicinity of this product, read the following precautions
and properly handle this product and other devices in the vicinity.
Install and use this product according to "Electromagnetic Compatibility (EMC) Information" in
Appendix.
WARNING
• Do not place any objects that emit strong electromagnetic waves near this product.
Otherwise, malfunction of this product may occur.
• Do not use this product adjacent to other equipment. If such use is necessary, this product
and the other equipment should be observed to verify that they are operating normally.
Failure to do so could result in improper operation.
• Do not use portable and mobile RF communications equipment closer than 30 cm to any
part of this product. Otherwise, degradation of the performance of this product could result.
CAUTION
• Use this product in the specified environment and with specified methods. Failure to do so
may result in an abnormality of an endoscopic image (rotation or inversion of the viewing
image).
• Noise may appear on the monitor of this product due to the effect of electromagnetic
interference. In this case, turn off the device emitting the electromagnetic waves or move
the device away from the monitor.
This product may receive electromagnetic interference even if related equipment conforming to
EN 55011 is used.
Use of this product may cause electromagnetic interference. Depending upon the strength
of electromagnetic interference within the vicinity of this product, malfunction of this product
or peripherals may occur. If this product does cause harmful electromagnetic interference
to other devices, or if this product receives electromagnetic interference from other devices,
we recommend that you may try to correct the interference by one or more of the following
measures:
• Change the orientation or position of any affected device.
• Increase the spacing between devices.
• Connect the product into an outlet on a circuit different from that to which the other
device(s) are connected.
• Take mitigation measures such as shielding the installation location of any affected device.
If the problem cannot be solved with the above measures, stop using this product and consult
the manufacturer or your local FUJIFILM dealer for help.
ED580XT_E2-30_897N200877B.indb 7 2018/09/20 15:50:16