FujiFilm ED-580XT, Руководство по эксплуатации

Страница: 88 / 136

897N200877B
5-6
Chapter 5 How to Use
5.2.2 Observing Endoscopic Image
Refer to the operation manual of the light source and processor for instructions on how to
adjust the brightness, color, etc.
CAUTION
• During an observation, do not perform close observation for an extended period of time.
Use the endoscope with a minimum necessary amount of brightness and time while
maintaining an appropriate distance. Thermal energy created by illumination may cause
burn injury.
• When the shutter speed is set to "HIGH", take care not to set the brightness level too high.
Thermal energy created by illumination may cause burn injury.
• If the brightness level of the light source or processor is high, the surface temperature at
and around the distal end of the endoscope may exceed 41°C. Do not allow the distal end
to remain in contact with the same site for an extended period of time. It may cause burn
injury.
Note • In cases with bleeding, use the light save function of the light source. Patient's blood
adhering to light guide at the distal end of endoscope may be coagulated by the
energy of illumination. For details on how to use the light save function, refer to the
operation manual of light source.
• If any steam-like smoke appears in the endoscopic image, or if the endoscopic
image becomes dark, blood or other substances may adhere to the light guide at
the distal end of endoscope. Withdraw the endoscope from the patient immediately,
remove foreign matter, make sure that the light guide has no abnormality, and then
use the endoscope again. If foreign matter is not removed, the temperature at the
distal end of endoscope may rise, causing damage to the endoscope or burn injury
to the patient or operator.
ED580XT_E2-30_897N200877B.indb 6 2018/09/20 15:50:24