FujiFilm ED-580XT, Руководство по эксплуатации

Страница: 103 / 136

897N200877B
6-1
Chapter 6
Trouble
shooting
Chapter
6
Troubleshooting
This chapter describes actions which should be taken if problems or questions occur while
inspecting or using the endoscope.
If any abnormality is found during inspection, take appropriate measures by following the
instructions described in “6.1 Troubleshooting.”
If the problem persists even after following troubleshooting chart in “6.1 Troubleshooting”,
consult your local FUJIFILM dealer and return the product for evaluation and/or repair
according to “6.4 Returning Endoscope for Repair.”
If any abnormality occurs during a procedure, immediately stop using the product and withdraw
the endoscope from the patient according to “6.2 Withdrawal of Endoscope with Abnormality.”
WARNING
• Make sure to inspect the endoscope and accessories before use according to the
procedures provided in this manual. Do not use the equipment that shows any signs
of abnormality or irregularity. Use of abnormal equipment may lead to misdiagnosis or
increase risks to patient safety.
• If any abnormality occurs during use, carry out safety checks such as checking the
patient's condition and discontinue use immediately. Not doing so may seriously affect
patient safety.
Note Accessories including but not limited to air/water valves, suction valves, forceps
valves, cleaning brushes, cleaning adapters, distal caps, etc. are consumable items.
If any deterioration or abnormality is found in accessories, they need to be replaced.
Accessories cannot be repaired or refurbished. Thus, if any abnormality is found,
replace with a new one.
ED580XT_E2-30_897N200877B.indb 1 2018/09/20 15:50:25