FujiFilm DR-ID 1300, Руководство по обслуживанию

Страница: 204 / 628

MU1-39
MU1-39
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-06E
1.4.3 Sensitivity Correction Coefficient
It is used when selecting the target SE and changing the sensitivity correction
coefficient.
1200_400073E.ai
(2)
(3)
(1)
(4)
(4)
(1) Click “CALIBRATION” - “Sensitivity Correction Coefficient”.
The Sensitivity Correction Coefficient window opens.
(2) Select the target SE from the drop-down list box.
(3) Click [GET].
The Sensitivity Correction Coefficient are displayed.
(4)
When making changes, input them in “Updated Value”, and click [SET].
The SE software will be updated with the updated version.
1.4.4 GLG Calibration
u
NOTE
u
Not used in the DR-ID 1300.
Zero point adjustment for the high G sensor (3 directions) is performed. GLG
calibration must be performed at the time of replacement of the GLG board.
1200_400074E.ai
(2)
(3)
(1)
(1) Click “CALIBRATION” - “GLG Calibration”.
The GLG Calibration window opens.
(2) Select the target SE from the drop-down list box.
(3) Click [START].
If it is successful the high G sensor 0G output will be acquired, “Succeeded”
appears in the pop up window.
(4) Click [OK].
The offset value is stored in the FRAM of the GLG board (restart is not required).
REFERENCE
After execution of calibration, the actually measured value min us the offset value
is stored in the log as the measured value.