FujiFilm DR-ID 1300, Руководство по обслуживанию

Страница: 308 / 628

MU2-43
MU2-43
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-02E
[6.4] Lag Calibration >>

Display Window
DRID600_G0097E.ai
#1
Lag Calibration >> window
#2
#1 Input: Target SE No.
#2 Click: [SET]

Function Description
Lag correction calibration takes place under the following conditions:
- Exposure conditions: Tube voltage of 80 kV, dose of 100 mR or more, irradiation
time of 200 msec or shorter
- Exposure count: 1
u
NOTES
u
- Be sure to make a single exposure after you click [Start]. Then click [Create a Lag
Data]. Processing cannot be terminated, waiting for data generation, if you click
[BACK] without clicking [Create a Lag Data]. Return to the “Lag Calibration” window
and again follow the procedures in this case.
- Clicking [Start] during automatic offset update (always taking place approx. at
10-minute intervals when no exposure menu is selected), “Error 12700 currently
unavailable” is displayed. Again click [Start] approx. 30 seconds later in this case.
REFERENCE
Whether the check is successfully completed appears on the result display area.
An error code is displayed in some cases. Refer to the Troubleshooting manual and
take appropriate countermeasures.
- Operation Setting:
Selects the operative method for calibration.
- Start:
Clicking [Start], the mode setting takes place.
- Display Progress Status:
Clicking [Display Progress Status], you can view the number of acquired frame data.
Data of eight frames are acquired by a single exposure.
- Display ShotRdy:
Completion of the shooting preparation by the panel is checked.
<Result indication>
- SHOT_READY: Completed
- NOT_READY: Not completed
- Create a Lag Data:
Lag correction data is generated.