FujiFilm DR-ID 1300, Руководство по обслуживанию

Страница: 223 / 628

MU1-58
MU1-58
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-06E

MC ETH1 Network Setting
Set the following MC addresses.
- IP Address (Default: 192.168.0.10)
- Subnet Mask (Default: 255.255.255.0)
CAUTION
Enable the set value in the order of the SE, MP and MC to make them effective.
If a wrong order is taken, the setting does not get effective, and might result in
need of initializing the machine.
1200_400114E.ai
(2)
(2)
(1)
(1) Click “NETWORK SETTING” - “MC ETH1 Network Setting”.
The MC ETH1 Network Setting window opens.
(2) To change the addresses, enter the “Updated Value”, and click [SET].
The IP Address of the MC will be updated.

Restarting the config and checking the setting effected
1200_400115E.ai
(6)
(4)
(5)
(1) Turn OFF the power in the order named of the CL, MC and MP.
(2) Turn ON the power in the order named of the MP, CL and MC.
(3) Start up the MUTL.
(4) Click [NETWORK SETTING] and click [SE Network Setting].
The SE Network Setting window opens.
(5) Select the target SE from the drop-down list box.
(6) Click [GET].
Check that the IP address of the SE has been changed.
REFERENCE
If you confirm the IP address of the SE, you can determine that the change in
settings of the MP and the MC normally ends. This is because connection of
the SE can be confirmed only when connection between the MC and the MP is
normal.