FujiFilm DR-ID 1300, Руководство по обслуживанию

Страница: 552 / 628

IN2-75
IN2-75
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-04E
10.14 Changing the IP Address of the SE/MP/MC
NOTE
Take the following procedures only when the IP address of the SE/MP/MC is to be
changed from the default value.
(1) Change the IP address of the SE/MP/MC from the default value.
{IN:Appendix 3._Replacement Procedure of the Local Network}
INSTRUCTIONS
- The segment No. of the network address must be set to the same value
among the MC, MP, SE and AP. If different network address values are set,
the network among the machines might get disconnected. Initialization of the
machines might be needed in such a case.
How far in the IP address the network address indicates depends on the setting
of the subnet mask. As the default value of the subnet mask of the machine is
255.255.255.0, and locations assigned by 255 (mask value areas) indicate the
network address.
600_700206.ai
192.168.0.0
Network address
Segment No.
Host address
- If the segment No. of the network address is changed, the network address
of the access point (AP) must be changed to include the same segment No. If
the network address of the access point differs, wireless connection of the SE
cannot be made.
INSTRUCTION
If the IP address of the MP or the SE is lost by mistake during the operation
procedures, restore the IP address.
{IN:Appendix 2._Restoring the IP Address of the MP/SE}