FujiFilm DR-ID 1300, Руководство по обслуживанию

Страница: 605 / 628

AppxIN5-9
AppxIN5-9
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-04E
Appendix 5.2.2 Lag Calibration
REFERENCE
The focal size of the X-ray high voltage generator may be either large or small.
(1) Click [Lag Calibration >>] on the Calibration window.
The Lag Calibration >> window opens.
(2) Input the SE No. for calibration into [Input SE No.] and click [SET].
#1 Input: SE No.
#2 Click: [SET]
600_700275 .ai
Lag Calibration >> window
#2
#1
(3) Click [Operation Setting] and set the operative method.
#1 Click: [Operation Setting]
600_700180E.ai
Lag Calibration >> window <Display example>
#1
(4) Click [Start].
“Please wait for a few minutes” appears.
u
NOTE
u
If you click [Start] during automatic offset update (for 30 seconds every approx.
10 minutes), “Error 12700 currently unavailable” appears. Click [Start] again after
an interval of approx. 30 seconds, in this case.
(5) Click [OK].
“OK” appears in the result display area approx. 2 minutes later.
(6) Click [Display ShotRdy] and confirm display of "SHOT_READY" in the
result indication column.
u
NOTE
u
If "NOT_READY" is indicated, wait for approx. 5 seconds, try again, and proceed
to the next step (exposure) after "SHOT_READY" is indicated.
When exposure is executed in "NOT_READY" status, the calibration fails and an
abnormal image is generated.
(7) Expose 1 time with the following condition.
- 1305SE : Tube voltage of 80 kV, Dose of 100 mR
Images for lag correction data generation (7 frames) are read from the SE (FPD).
Images of seven frames are read with a predetermined interval for one exposure.
Clicking [Display Progress Status], you can know the number of image reads. The
count is displayed in the format of “n/7” in the result display area after n-times of
reads.