FujiFilm DR-ID 1300, Руководство по обслуживанию

Страница: 92 / 628

DR-ID 1300 / DR-ID 1300PU Service Manual
MT-15
MT-15
018-234-06E
Error
Code
Error Name Occurrence Condition Probable Cause and Remedy
12235
Insufficient number of
exposures for residual image
calibration
[During full calibration]
After residual image calibration is to take place, the number of exposures
necessary for the residual image calibration is recognized to be
insufficient.
<Reference>
A single exposure is necessary to carry out the residual image calibration.
- Check the exposure count.
- Continue exposures until the necessary exposure count
for the residual image calibration is reached, and click
[Create a Gain Data].
12236 Defect map compression/
decompression failure
Compression or decompression of the defect map fails.
12240 Exposure menu error (SE not
connected)
[During exposure menu registration]
The exposure menu cannot be accepted because the SE is not
connected.
- Check communication among the MC, the MP and the
FPD.
- Check the connection with the AP (for wireless type).
- Check the connection of the SE cables (for wired type).
12242 Exposure menu error (serial ID
not registered)
[During exposure menu registration]
The exposure menu cannot be accepted because the SE serial ID is not
registered.
- Register the serial ID of the SE.
12243 Image transfer error (log level)
[During routine processing]
Image transfer fails. Or an error occurs in the exposure sequence.
- Check communication among the MC, the MP and the
FPD.
- Check the connection with the AP (for wireless type).
- Check the connection of the SE cables (for wired type).
12245 Exposure menu error (panel
degeneration)
[During exposure menu registration]
The exposure menu cannot be accepted because the panel is
degenerated.
- Select a defective item from the detail error log, and
check it.
12246 Panel communication error (log
level)
[During exposure menu registration]
An error occurs in a control command to the panel.
- Check communication among the MC, the MP and the
FPD.
- Check the connection with the AP (for wireless type).
- Check the connection of the SE cables (for wired type).
12250 DR cassette unit error
[During bootup/routine processing]
An error is detected in the DR cassette unit.
12255 Long panel error
[During bootup/routine processing]
An error is detected in the long panel hardware or the SE setting.
- Check the long panel setting.
12280 Marker calibration data
generation error
[During full calibration]
An error is detected in marker calibration data generation.
- Check the marker position and exposure conditions.
- Check the hardware error.
12281
Insufficient number of
exposures for marker
calibration
[During full calibration]
After marker calibration is to take place, the number of exposures
necessary for the marker calibration is recognized to be insufficient.
- Check whether the exposure count has turned to the
fourth exposure.