FujiFilm DR-ID 1300, Руководство по обслуживанию

Страница: 342 / 628

SP-1
SP-1
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-02E
How to Use
Service Parts List
■ RANK
● Handling RANK characters (parts
that are handled in a special manner
during parts operation, such as
management)
Character Under Warranty Out of Warranty
R Must be returned. Repairable
Q
Must be returned.
(We use for
analysis.)
Not repairable
T
Must Not be
returned.
(Consumable
part. Not
applicable to
free-of-charge
warranty.)
Not repairable
without
R, Q, T
Must Not be
returned.
Not repairable
●
Export regulation-applicable
character (Parts with the following
character are controlled by Export
regulation.)
Character Significance
＋
Parts applicable to export
regulations.
● Fault RANK characters (which
provide reference for determining the
recom-mended stock quantity)
All parts are assigned with one of
characters A through E.
Character Significance
A
Consumable parts or parts
that will be replaced at short
intervals.
B
Parts that may become faulty
accidentally and have a
relatively high failure rate.
C
Parts that have a sufficiently long
MTBF, but are expected to have
a relatively high failure rate.
D
Parts that have a sufficiently
long MTBF, but are expected to
become faulty.
E
Parts that are necessary for fault
analysis, or parts that may be
needed in case of unexpected
accidents such as man-induced
damage.
<The RANK guide>
The Fault RANK characters, Handling
RANK characters, and Export regulation-
applicable character are assigned in that
order.
Thus, at least one character or up to three
characters are assigned in the RANK
column.
■ REF.NO.
REF. NO. is a part number indicated in the
Service Parts Exploded Views. For parts
having different functions, they are clearly
distinguished in the REMARKS and SERIAL
NUMBER columns.
■ PART NUMBER
PART NUMBER is a code number that is
unique to each part. An alphabetic letter at
the rightmost position of the code number
has the following meaning.
○For hardware
The alphabet denotes the version number
of a part. If parts have different version
numbers, they are upward-compatible.
○For software
The alphabet denotes a difference in the
specifications. Parts differing in the suffix
are not compatible with each other. Version
number is omitted in the list.
■ PART NAME
PART NAME represents a general name of
a part.
■
QTY.
○QTY. denotes the quantity of parts used in
each unit.
○A part whose quantity is suffixed with -S
represents a small part that is shipped in
packs of 50. (Even if such a part is ordered
in quantity of 1, a pack containing 50 pieces
of that part is supplied.)
■ REMARKS
The REMARKS column indicates a unique
name of a part or relevant information of
each part.
■ SERIAL NUMBER
The units may contain different parts
depending on their shipment control number.
SERIAL NUMBER indicates the shipment
control number to which the relevant parts
are applicable. If the SERIAL NUMBER
column is blank, the parts are applicable to
all the relevant units. The shipment control
number is represented by lower five digits
of eight-digit number indicated on the rating
indication label.
■ REFER TO
The "REFER TO" column shows reference
sections concerning the part.Clicking
the reference section in the "REFER
TO" column jumps to the top page of
the reference section where the related
information is in.
■ Quantities of recommended spare
parts
It is recommended as a rough guide to hold
in stock a certain quantity of parts according
to the rank (A, B, C, D, E) assigned to the
parts, as follows. For periodically replaced
parts, hold them in stock separately. Adjust
the stock quantity of service parts depending
on the number of working units (N).
Quantity used in a single system : Q
○N = 1
Rank A = 1 + Q × 0.3
Rank C = 1 + Q × 0.05
Rank D = 1 + Q × 0.02
○2 ≦ N ≦ 10
Rank A = 2 + N × Q × 0.3
Rank C = 2 + N × Q × 0.05
Rank D = 2 + N × Q × 0.02
○11 ≦ N ≦ 300
Rank A = 3 + N × Q × 0.3
Rank C = 3 + N × Q × 0.05
Rank D = 2 +
N × Q × 0.02
■ Precautions to be Observed When
Returning Parts for Repair
When returning a component for repair,
pack it in the same manner as for the
supplied substitute, using the substitute
packing materials.
The use of different packing materials or
packing methods may incur damage to
packed component during transit.