FujiFilm DR-ID 1300, Руководство по обслуживанию

Страница: 63 / 628

Product Specifications
-18
Product Specification
-18
DR-ID 1300 / DR-ID 1300PU Service Manual
018-234-03E
11.2 Failure Attributed to the Manufacturer
11.2.1 How to Determine Whether the Failure Is Attributed
to the Manufacturer
If none of conditions mentioned in Sect. 11.1.1 is applicable, the failure is determined
to be attributed to the manufacturer (FUJIFILM).
11.2.2 Action When the Failure Is Attributed to the
Manufacturer
The machine is repaired (primary repair by the sales company), referring to the
troubleshooting manual.
A defective point is identified. Cable connection is checked, or the board is replaced
as needed.
The manufacturer (FUJIFILM) bears the cost of the primary repair during the charge-
free guarantee period. Request via the PRS (Parts Request System).
u
INSTRUCTION
u
Observe the following terms when the primary repair takes place by the sales
company.
- Do not repair or modify if the external form of the SE deforms.

Cases Where the Repair Is Not Possible
Install the SE from the stock at the sales company, return the defective SE to the
manufacturer (FUJIFILM), and request the SE to apply for the free guarantee of
charge.

When the Failure Is Solved by the Primary Repair
The machine can be continuously used as it is free from the possibility of the damage
and has no problem on its quality.