FujiFilm DR-ID 1300, Руководство по обслуживанию

Страница: 93 / 628

DR-ID 1300 / DR-ID 1300PU Service Manual
MT-16
MT-16
018-234-06E
Error
Code
Error Name Occurrence Condition Probable Cause and Remedy
12405
Unexpected notification of
exposure performance
[During routine processing]
The exposure performance is notified although the exposure conditions
are not notified.
12406 Exposure performance out of
range
The exposure performance notified from the retro radiation source is out
of the range defined by the CU.
12407 Serial communication error
The following error occurs in the serial communication with the retro
irradiation source.
12500 Invalid exposure parameters
[During routine processing]
Exposure condition parameters sent from the CL are unrecognizable
values.
<Reference>
You can know the unrecognizable items and values on the error log.
- Check the CL exposure conditions.
12501 Invalid application mode
[During routine processing]
An application mode which cannot be supported by the system controller
of the CU is sent from the CL.
<Reference>
- An application mode refers to a mode of exposures such as normal
still image exposure, long cassette exposure, tomography and energy
subtraction.
- The unsupportable mode application mode means such conditions
that an erroneous mode is set against the operative method, such as
tomography in the chest position or long cassette exposure in the bed
position.
- You can know the application mode and the operative method on the
error log.
- Check the CL exposure conditions.
12502 Line disconnection detected
[During routine processing]
Breakage of the line with the CL is detected.
(Except when the line is intentionally cut for termination or utility)
- Check the LAN cable.
12503 Invalid message from CL
[During routine processing]
An unrecognizable message is received during communication with the
CL.
<Reference>
You can know the command name which is received but cannot be
recognized on the error log.
- Check the CL software version.
- Check the CU software version.
12504 CL response error
[During bootup/routine processing]
Response other than normal is received from the CL.
12599 CL system error
[During bootup/routine processing]
An error is detected in the CL system.