Franklin Electric CERUS X-DRIVE CXD-003A-4V, Инструкция по установке и эксплуатации

Страница: 220 / 252

PARAMETER REFERENCE TABLES
Parameter Descriptions > Protection Menu
220
Parameter Descriptions > Protection Menu
AR = Adjustable while running.
ADV-53 0821 Y Main Stp Delay 1 to 65535 sec Time delay before main pump stops when all conditions have been met.
ADV-55 0823 Y AVR Select 0_Enable AVR
1_Disable AVR
2_Disable AVR Dec
Auto Voltage Regulation Select automatically regulates the drive output
voltage to the motor rated voltage.
ADV-56 0824 N Prog-1 Setting 0_None
1_VFD Run
2_Step Freq 1
3_Step Freq 2
4_Step Freq 3
5_S-Point-A
6_S-Point-B
7_S-Point-AB
Sets Program #1 operation to Run/Stop control, Speed, or Set-point.
ADV-57 0825 N Prog-1 On Time 0 to 2400 Program #1 activation of Run/Stop control, Speed, or Set-point.
ADV-58 0826 N Prog-1 Off Time 0 to 2400 Program #1 deactivation of Run/Stop control, Speed, or Set-point.
ADV-59 0827 N Prog-1 Week Day 0000h to 007Fh Day(s) of the week for Program #1 to operate. Binary day representation
SMTWTFS = 127 (007FH in Hexadecimal).
ADV-60 0828 N Prog-2 Setting See [ADV-56] Sets Program #2operation to Run/Stop control, Speed, or Set-point.
ADV-61 0829 N Prog-2 On Time 0 to 2400 Program #2 activation of Run/Stop control, Speed, or Set-point.
ADV-62 0830 N Prog-2 Off Time 0 to 2400 Program #2 deactivation of Run/Stop control, Speed, or Set-point.
ADV-63 0831 N Prog-2 Week Day 0000h to 007Fh Day(s) of the week for Program #2 to operate. Binary day representation
SMTWTFS = 127 (007FH in Hexadecimal).
ADV-64 0832 N Prog-3 Setting See [ADV-56] Sets Program #3 operation to Run/Stop control, Speed, or Set-point.
ADV-65 0833 N Prog-3 On Time 0 to 2400 Program #3 activation of Run/Stop control, Speed, or Set-point.
ADV-66 0834 N Prog-3 Off Time 0 to 2400 Program #3 deactivation of Run/Stop control, Speed, or Set-point.
ADV-67 0835 N Prog-3 Week Day 0000h to 007Fh Day(s) of the week for Program #3 to operate. Binary day representation
SMTWTFS = 127 (007FH in Hexadecimal).
ADV-68 0836 N Prog-4 Setting See [ADV-56] Sets Program #4 operation to Run/Stop control, Speed, or Set-point.
ADV-69 0837 N Prog-4 On Time 0 to 2400 Program #4 activation of Run/Stop control, Speed, or Set-point.
ADV-70 0838 N Prog-4 Off Time 0 to 2400 Program #4 deactivation of Run/Stop control, Speed, or Set-point.
ADV-71 0839 N Prog-4 Week Day 0000h to 007Fh Day(s) of the week for Program #4 to operate. Binary day representation
SMTWTFS = 127 (007FH in Hexadecimal).
ADV-74 0842 Y S-Point-A 0 to [SET-20] Activate this parameter by setting a DI (digital input) [IO-21] to [IO-28] to
48_Set-point-A or in Scheduling program.
ADV-75 0843 Y S-Point-B 0 to [SET-20] Activate this parameter by setting a DI (digital input) [IO-21] to [IO-28] to
49_Set-point-B or in Scheduling program.
ADV-76 0844 Y S-Point-AB 0 to [SET-20] Activate this parameter by setting a DI (digital input) [IO-21] to [IO-28] to
48_Set-point-A and 49_Set-point-B or in Scheduling program.
CODE Mod
Bus AR Display Name
Range Description
CODE Mod
Bus AR Display Name
Range Description
PROT-00 1024 N Decel Method 0_Normal
1_Over Fluxing
2_Traction Energy
0_VFD follows Deceleration time [SET-12]
1_VFD prevents DC bus Over voltage by over-fluxing the motor at [PROT-14]
voltage. The Decel time can be longer than [SET-12] value.
2_VFD prevents DC Bus Over voltage by changing output frequency and
voltage. The Decel time can be longer than [SET-12] value.
PROT-01 1025 Y Preheat Level 0 to 100% Percentage of nominal current applied to the motor as DC voltage to heat
the VFD and motor. Slowly increase the percentage to reach the sufficient
preheating temperature.
PROT-02 1026 Y Preheat Duty 0 to 100% Sets output current cycle of preheating, which corresponds to 0 to 10 sec -
onds.
0% - no output current
50% - 5 seconds OFF and 5 seconds ON
100% - continuous output current