Franklin Electric CERUS X-DRIVE CXD-003A-4V, Инструкция по установке и эксплуатации

Страница: 193 / 252

MAINTENANCE
Troubleshooting
193
Vivd
(130)
VFD-N Invalid
For Multi-drive operation, at least one follower is connected but the settings on the follower are invalid compared to
the master (this drive).
Action and Reset
Action condition A follower settings of [ADV-35] , [ADV-36] , [SET-07] , and [SET-17] different than master drive (this drive). To identify master
drive, set [SET-58] to 23_Commu Role . On screen, 0=No Role, 1=Master, and 2=Follower.
Action time Immediately
Related parameters [ADV-35] , [ADV-36] , [SET-07] , and [SET-17]
Reset method Automatically once parameters are set correctly
Reset condition Immediately; May require power cycle of system once parameters have been adjusted.
Recorded N/A
Possible Causes Corrective Action
• Wrong parameter values for ADV-35,
ADV-36, SET-07, and SET-17
• Multiple masters on network
• Verify settings match master drive. To identify master drive, set [SET-58] to 23_Commu Role . On screen,
then 0=No Role, 1=Master, and 2=Follower.
• If network has multiple masters, make sure each drive on network has unique Mulit-VFD ID [ADV-37] and
that value is equal or less than Multi-VFD Set [ADV-35] .
• If network has multiple masters, check communication wiring between drives and replace wiring as
needed.
Warning Display Description
Vlos (129)
VFD-N Lost
For Multi-drive operation, at least one follower is disconnected from the master (this drive).
Action and Reset
Action condition The number of drives detected are less than
Multi-VFD Set [ADV-35]
.
This warning only occurs on the master drive.
To identify master drive, set
[SET-58]
to
23_Commu Role
then 0=No Role, 1=Master, and 2=Follower.
Action time Immediately
Related parameters
[ADV-35]
,
[ADV-36]
, and
[ADV-37]
Reset method Automatically once parameters are set correctly
Reset condition Immediately; May require power cycle of system once parameters have been adjusted.
Recorded N/A
Possible Causes Corrective Action
• Communication line broken
• Multiple VFDs with the same
Multi-VFD ID [ADV-37]
• Check wiring between drives and replace as needed.
• Check
Multi-VFD ID [ADV-37]
on each drive to make sure each drive has a unique value and that it is less
than
Multi-VFD Set [ADV-35]
.
Warning Display Description
VnAT
(132)
VFD HOA not Aut
For Multi-drive operation, this VFD is not in Auto mode. This drive will not operate in multi-drive operation with this
warning present.
Action and Reset
Action condition Multi-VFD Set [ADV-35] is not 0_Single VFD and mode set to HAND or OFF .
Action time Immediately
Related parameters Multi-VFD Set [ADV-35]
Reset method Automatically once set [ADV-35] to 0_Single VFD or change mode to AUTO .
Reset condition Immediately
Recorded N/A
Possible Causes Corrective Action
• This drive is in HAND or OFF mode.
• This drive has Multi-drive operation
enabled.
• Use HOA Mode Source [SET-60] to change mode to AUTO .
• Change Multi-VFD Set [ADV-35] to 0_Single VFD to disable Multi-drive operation.
Warning Display Description