FPI CEMS-2000 Series, Руководство пользователя

Страница: 17 / 133

2 Safety Information
XVI
FOCUSED PHOTONICS INC
Table 2-1 Safety symbol and description
Safety Symbol Description
Caution, risk of danger: To suggest a general safety concern
Caution, risk of electric shock: To suggest a danger of high voltage
Caution, Hot Surface Warning
Attention, electrostatic-sensitive equipment
Safety precautions are classified into the following levels: Danger, Warning, Caution and
Note.
z
Danger: Suggests the possibility of a fatal accident or body injury if safety precautions
are ignored.
z
Warning: Suggests the possibility of a major accident or severe injury, or equipment
damage, if safety precautions are ignored.
z
Caution: Suggests the possibility of a severe injury, or that the equipment may be
damaged, if safety precautions are ignored.
z
Note: Suggests the possibility of an injury or equipment damage, if safety precautions
are ignored
2.1.2
General Requirements
In order to reduce the technically unavoidable residual risk to a minimum, it is imperative to
follow the rules below:
z
Read all the instructions before operation.
z
When installing the product, always make the ground connection first and disconnect it
last.
z
Do not block ventilation openings while the system is on, and keep at least 5 cm
distance from ventilation openings and walls or other things which may block the
openings.
z
Never defeat the ground conductor or operate the equipment in the absence of a suitably
installed ground conductor. Contact the appropriate electrical inspection.
z
The unit/system must be connected to the protection ground before operation
permanently. And the cross-section of protective earthing conductor shall be at least
6mm2.
z
When moving or lifting the chassis, please use the handles that are directly in the chassis,
or lift the chassis by grasping its lower edge, and it is not permitted to use the handles on