FPI CEMS-2000 Series Скачать руководство пользователя страница 4

Страница: 4 / 133

IMPORTANT NOTICE

- III -

Warranty and Maintenance

The detailed warranty and maintenance shall be performed subject to the terms and conditions

stipulated in the sales contract.

FPI offers free repairing services for the products within the warranty period and range including

product repairing, spare parts replacing, technical support and routine field service.

The free repairing services are not applying to the products which are out of warranty period or

failures or damages occur during the warranty period but cause by the following reasons including

but not limited to:

1) Incorrect use (water seepage, corrosion, fire or HV shock);

2) Force majeure (earthquake, lightening or flood);

3) Unauthorized change or modification inside the product.

4) Non-compliance of user manual or training instructions.

FPI follows the national regulations for the disposal of used or wasted products manufactured by

FPI.

Technical Support

Customer Care Telephone: 400 7007 555

Fax: 0571-86791505

E-MAIL: [email protected]

Web:

www.fpi-inc.com

Declaration

This manual is not liable for legal responsibilities. Please refer to the relevant contract for the legal

provisions.

further notice. Authorized copy of this manual is prohibited.

Содержание CEMS-2000 Series






































































































































Результаты поиска

Содержание CEMS-2000 Series

Отзывы:

Похожие инструкции для CEMS-2000 Series

Бренды по названию

Популярные бренды

FPI CEMS-2000 Series, Руководство пользователя

Результаты поиска

Содержание CEMS-2000 Series

Отзывы:

Похожие инструкции для CEMS-2000 Series

Бренды по названию

Популярные бренды