FPI CEMS-2000 Series, Руководство пользователя

Страница: 68 / 133

6 Operations of OMA-2000 Spectroscopic Gas Analyzer
46
FOCUSED PHOTONICS INC
Fig 6-26 Flow Rate Parameter Setup
¾ Flow rate current: Press F1 to read the current of flow rate;
¾
Offset of zero point: Set the offset value of zero point;
¾ Smoothness times: Set the smoothness times of the flow rate.
z
Temperature control: Used for setting and reading the system temperature, as shown in
Fig 6-27.
Fig 6-27 Temperature Control Setup
The users can read the system temperature on temperature control setup page including the
temperature of gas room, probe and tracing pipe.
Besides, the users can also set the target value for each temperature parameter. If the
temperature is lower than the presetting value, the system will automatically start heating by the
temperature control.