Format kappa 30, Руководство пользователя

Страница: 90 / 96

Panel Saw
Kappa 30 / kappa 40
Faults
11.12 Calibrate the saw blade height display
11.13 Red light-emitting diode „Problem“ lights up
The red light-emitting diode „Problem“ Lights up as a
result of the following causes:
• No belt position has been detected e.g.: Torn belt:
Renew the belt.
• Two belt positions have been detected e.g.:
Clogged: Clean the belt detector with dry cloths.
!
Speed detector
Attention! Risk of material damage! Do not use detergents! Clean the speed detector with a dry cloth only.
Fig. 143: Speed detector
1. Select the measuring equipment according to the desired
accuracy.
2. The saw blade must be selected according to the tooling!
Adjusting the cutting height: 50 mm
3.
Hold down the reset key for approx. 3 seconds.
4. The display will be calibrated and automatically converts
the height for other saw blade diameters.
!
Measuring equipment
"
Height adjustment - Quick motion switch
#
Slow motion to the top
$
Display - Cutting height
%
Reset key
90
!
50 mm
" #
%
$
!
3 SEC