Format kappa 30 Скачать руководство пользователя страница 52

Страница: 52 / 96

Panel Saw

Kappa 30 / kappa 40

Making adjustments and preparations

Pull the clamping lever upwards.

Shifting the belt:

Reducing speed:

• Hook the belt onto the motor pulley first and then

onto the saw spindle.

Increasing speed:

• Hook the belt onto the saw spindle first and then

onto the motor pulley.

Push the clamping lever down slowly.

Close the lid on the back of the machine.

The selected speed is displayed on the control panel.

Motor pulley

Tension lever

Saw spindle

Belts

Fig. 62: Speed Set

8.11.3 Speed control with a frequency changer

Fig. 63: Control panel/Potentiometer

Attention! Risk of material damage! Never exceed the maximum speed indicated on the tool!

8.11.2 Changing the speed

Tilt the circular saw into a 30° position.

Switch the machine off and ensure that it cannot be

switched on again.

Open the lid on the back of the machine.

Lid

Fig. 61: Changing the speed

It is not necessary to change the speed using the belts for

machines with a frequency converter.

Electronic speed display

Note: Variable speed control (Option) Opera-

tion, programming, calibration etc., see sepa-

rate „x-motion control“ instructions manual,

section positioning control.



Содержание kappa 30

































































































Результаты поиска

Содержание kappa 30

Отзывы:

Бренды по названию

Популярные бренды

Format kappa 30, Руководство пользователя

Результаты поиска

Содержание kappa 30

Отзывы:

Бренды по названию

Популярные бренды