Format kappa 30 Скачать руководство пользователя страница 34

Страница: 34 / 96

Panel Saws

kappa 30/kappa 40

Panel Saw

Kappa 30 / kappa 40

Setup and installation

7.2 Installation

Characteristics of the installation site:

• Operation/room temperature: +10° to +40° C.

• Ensure that the work surface is sufficiently stable and

has the proper load-bearing capacity.

• Provide sufficient light at the workstation.

• Ensure there is sufficient clearance to or shield neigh-

bouring workstations.

7 Setup and installation

7.1 Safety instructions

Attention! Risk of injury: Improper assembly and installation can lead to serious bodily injury or equip-

ment damage. For this reason these works may only be carried out by authorised, trained personnel who

are familiar with the operation of the machine and in strict observance of all safety instructions.

Warning! Danger – electric current: Work on electrical fittings may only be carried out by qualified person-

nel and in strict observance of the safety instructions.

Before assembling and installing the machine, check to

make sure it is complete and in good condition.

Warning! Risk of injury: An incomplete, faulty or damaged machine can lead to serious bodily injury or

equipment damage. Assemble and install the machine and other units only if they are complete.

Attention! Risk of material damage: Only operate the machine in ambient temperatures from

+10° to +40° C. If the instructions are not followed, damage may occur during storage.

• Ensure that there is sufficient space for working

around the machine. If there is not sufficient dis-

tance between the machine and neighbouring ma-

chines, walls or other solid objects, the rail-guided

work-pieces pose a risk during the sawing process.

• Keep the work area orderly and clean. Components

and tools that are not fixed or have been left lying

around may be the cause of accidents!

• Install the safety equipment according to the instruc-

tions and check that it functions properly.

Содержание kappa 30

































































































Результаты поиска

Содержание kappa 30

Отзывы:

Бренды по названию

Популярные бренды

Format kappa 30, Руководство пользователя

Результаты поиска

Содержание kappa 30

Отзывы:

Бренды по названию

Популярные бренды