manualshive.com logo in svg

Format kappa 30, Руководство пользователя

Поделиться
Скачать
Format kappa 30 Скачать руководство пользователя страница 25

Panel Saw

Kappa 30 / kappa 40

Setting up the machine

5.5.3 Saw guard

Attention! Risk of injury! When working with the circular saw blade, the machine‘s saw blade should be 

equipped with a saw guard to avoid injuries!

A second EMERGENCY-STOP button is located on the 

right-hand side of the machine.

Use the EMERGENCY-STOP button to stop the machine 

in case of an emergency.

Release the EMERGENCY-STOP button by turning it.

!

EMERGENCY-STOP button

Fig. 14: EMERGENCY-STOP button

5.5 Safety devices

5.5.1 EMERGENCY-STOP button

5.5.2 Sliding table locking system

The sliding table can be locked into two positions with 

the lever. The positions are marked with arrows on the 

base.

1.

  Slide the sliding table into the desired pause posi-

tion.

2.

  Shift the lever to the front. Slide the sliding table to 

and fro so that it locks into position.

3.

  To unclamp, shift the lever to the back.

!

Lever

"

Arrows

Fig. 15: Sliding table locking system

25

!

!

"

Содержание kappa 30

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды