Format kappa 30, Руководство пользователя

Страница: 43 / 96

Panel Saws
kappa 30/kappa 40
Panel Saw
Kappa 30 / kappa 40
Making adjustments and preparations
90°-Position:
1.
Loosen the clamping lever and thumb screws.
2.
Retract the crosscut fence until it reaches the locked
jaw. Correct the position with the slotted round nut if
required.
3.
Clamp the clamping lever in place and tighten the
thumb screws.
/
Locking jaws
(
Slotted round nut
Fig. 42: Fixing the crosscut fence
8.6 Crosscut fence-Extension
Fig. 43: Crosscut fence-Extension
The crosscut fence is usually equipped with an extension.
1. Loosen the thumb screw.
2. Move the cross stop as far as it goes.
3. Tighten the thumb screw.
4. Loosen the thumb screw.
5. Move the cross stop to the desired position. The
measurement (rip capacity) reading is read from the
magnifying lens.
6. Tighten the thumb screw.
!
Move the cross stop
#
End stop
"
Thumb screw
$
Lens
43
(
/
!
"
#
$