manualshive.com logo in svg

Ford Explorer 2004, Техническое учебное пособие, Страница: 92 / 134

Поделиться
Скачать
Ford Explorer 2004 Скачать руководство пользователя страница 92

LESSON 3: POWERTRAIN

7.

There are three filtering or screening devices in the fuel delivery system. The intake sock is a fine, nylon

mesh screen mounted on the intake side of the fuel pump. The fuel filter assembly is located between the FP

and the fuel rail. There is  a fuel filter screen located on the fuel rail side of the fuel injector.

8.

The FP module contains the FP and the fuel sender assembly. The FP is located inside the reservoir and

supplies fuel to the engine.

9.

The Inertia Fuel Shutoff (IFS) switch (located above the passenger side kick panel), is used to de-energize the

fuel delivery secondary circuit in the event of a collision. The IFS switch is a safety device that should only

be reset after a  thorough inspection of the vehicle (following a collision).

2004 Explorer/Mountaineer New Model Technician Training

12-AUG-03

3-42

Содержание Explorer 2004







































































































































Отзывы:

Нет отзывов