manualshive.com logo in svg

Ford Explorer 2004, Техническое учебное пособие, Страница: 33 / 134

Поделиться
Скачать
Ford Explorer 2004 Скачать руководство пользователя страница 33

LESSON 2: CHASSIS

Driveline Indexing 

Indexing the Rear of the Rear Driveshaft

Always index the driveshafts before removal to avoid creating a vibration. Indexing the Explorer and

Mountaineer front and rear driveshafts is done using the same procedure as the 2003 MY Explorer and

Mountaineer.

1.

Put the vehicle in NEUTRAL and raise it on a hoist.

2.

Index-mark the rear axle pinion flange to the driveshaft flange. 

3.

Index-mark the rear driveshaft and the extension housing. Before removing or reinstalling the driveshaft,

make sure these marks are aligned. Do not allow the transmission output shaft to rotate before realignment.

The purpose of this step is to  maintain alignment between the yoke and output shaft. 

NOTE: Repeat the procedure for the front driveshaft.

2004 Explorer/Mountaineer New Model Technician Training

12-AUG-03

2-9

Содержание Explorer 2004







































































































































Отзывы:

Нет отзывов