Foma SO903i, Руководство пользователя

Страница: 56 / 384

53
Voice/Videophone Call
● When a Chaku-moji is received by the recipient, “ ” appears in the sender’s terminal display and charge is
required.
● If the recipient does not receive the Chaku-moji, “ ” appears. In this case, there is no charge. (For
example, when the recipient’s terminal does not have Chaku-moji support or if the Chaku-moji was received
in a condition other than that set using the Set Message display menu.)
● If the recipient’s terminal has the following settings or conditions, Chaku-moji cannot be delivered to this
recipient and the call is not saved in the Received record of the recipient’s terminal. The transmission result
is not displayed on the sender’s terminal and there is no charge for this transmission.
- When the recipient’s terminal is outside of the service area
- When the recipient’s terminal is powered off
- When the Public mode (Driving mode) is set
- When the To answer the Record message is set to 0 seconds, etc.
● Even if a Chaku-moji was delivered successfully to the recipient, the transmission result may not be
displayed in the sender’s terminal display depending on the radio wave condition. In this case, charge is
required.
● If you place a videophone call with a Chaku-moji while the Auto redial(voice) is set to [ON], the Chaku-moji
is sent even when this call is redialed as a voice call.
Changing the Caller ID Setting ON/OFF for an Individual Call
<186/184>
You can choose whether to notify a recipient of your phone number (caller ID) every time
you place a call.

The caller ID is important personal information. Carefully decide whether you want to notify a recipient of your
caller ID.
You can use the following methods to notify or not notify your caller ID.
Presetting for all calls Use the Set Notification to set [Notify]/[Not notify] (P.40).
Setting in the Phonebook Add “186/184” to the recipient’s phone number when you save it in the
Phonebook (P.87).
Setting when you place a call Set [Call with ID]/[Call with no ID] from the Call condition menu after dialing a
recipient’s phone number (P.53).
Enter “186/184” before dialing a recipient’s phone number (P.45).
● When you place a call by pressing after dialing a phone number with “186/184”, the phone number is
saved in the Redial record with “186/184”.
Placing a Call by Specifying a Condition
When you place a call, you can select a call type and call condition from the Call menu
or Call condition menu, for example, whether to notify a recipient of your phone number.
Example: Placing a voice call
1
Enter a phone number in the stand-by display and press (Call).
Ｖｏｉｃｅ ｃａｌｌ
Ｖｉｄｅｏｐｈｏｎｅ
ＰｕｓｈＴａｌｋ
[Voice call] : Select a call condition for a voice call.
[Videophone] : Select an image to be sent (My side/Substitute image/Select sub
image) and the communication speed (64K/32K) to be used when
you place a videophone call.
[PushTalk] : Select whether to notify your phone number when you originate a
PushTalk call.
Continued