Foma SO903i, Руководство пользователя

Страница: 51 / 384

48
Voice/Videophone Call
Entering a “+”
If you enter “+” at the beginning of a phone number when the Auto conversion of the
Int’l dial assist setting is set to [ON], a call is dialed by automatically adding the set
international access number (set to “009130010” at the time of purchase).
1
Press for over a second in the phone number input display.
“+” is entered.
● You may not be able to place the call if you enter other than a phone number after “+” or enter only “+”.
Switching to/from Voice/Videophone Call
<Chg. to videophone/Chg. to voice call>
A caller can switch to/from voice/videophone call during a call.

This function can be used only between terminals that can switch between voice and videophone calls. A
recipient must preset the V.ph switch notice to [Indication ON] (P.72).
Example: Switching from voice call to videophone call
1
Press (Func) during a voice call, select [Chg. to videophone], and press .
Ｃｈａｎｇｅ ｔｏ
ｖｉｄｅｏｐｈｏｎｅ？
Ｙｅｓ
Ｎｏ
[Yes] : Switch the call from voice call to videophone call.
[No] : Return to the voice call without switching the call.
To switch from videophone call to voice call
From the Function menu, select [Chg. to voice call] → [Yes]. When
the call is switched to the voice call, the hands-free operation is
canceled.
2
Select [Yes] and press .
Ｃｈｇ．ｔｏ ｖｉｄｅｏｐｈｏｎｅ
The recipient’s image
A substitute image may
appear according to the
setting on the recipient’s
terminal.
While the call is switched, an animation is displayed and you hear a guidance notifying you
that a call is switched.
When the call is switched to the videophone call, your image is sent to the recipient and the call is
switched to the hands-free operation that allows you to hear the recipient’s voice from the speaker.
● If packet communication is in progress, it is disconnected and the FOMA terminal is switched to
videophone.
● When the call is put on hold on the recipient or while the recipient is performing packet communication, you
cannot switch to videophone.
●
The switching operation takes about five seconds. It may take time depending on the radio wave condition.
● Switching to/from voice/videophone call may not be performed in some radio wave condition, and the
phone may be disconnected.
● You are not charged while “Chg. to videophone”/“Chg. to voice call” is displayed.
● Every time you switch, the call duration starts from 0 seconds. When you finish the call, the total call
duration is displayed for each of the voice and videophone calls.