Foma SO903i, Руководство пользователя

Страница: 167 / 384

164
i-mode/i-motion/i-Channel
Changing the i-mode Host
(ISP Connection Communication)
Default i-mode(UIM)
※ You do not need to change the Host setting when
using the i-mode service of DoCoMo.
You can set up to 10 hosts for receiving services other
than the services provided by i-mode (DoCoMo). When
you change a host to other than [i-mode(UIM)], you
cannot use i-mode.

You must always enter [Host name], [Host number], and [Host
address].
1
From the i-mode menu, select [i-mode setting] →
[Common setting] → [Host selection] and press .
ｉ−ｍｏｄｅ（ＵＩＭ）
Ｈｏｓｔ ｓｅｌｅｃｔｉｏｎ
To edit the settings of the set host
Move the cursor to the set host and from the Function
menu, select [Edit], and enter the Security code. Edit
each item.
To delete the set host
Move the cursor to the set host and from the Function
menu, select [Delete one], enter the Security code, and
select [Yes].
2
Press (Create).
The Security code screen appears.
3
Enter the Security code and press (OK).
Ｈｏｓｔ ｎａｍｅ
Ｈｏｓｔ ｎｕｍｂｅｒ
Ｈｏｓｔ ａｄｄｒｅｓｓ
Ｈｏｓｔ ａｄｄｒｅｓｓ２
Ｈｏｓｔ ｓｅｔｔｉｎｇ
[Host name]:
Enter a host name within eight full-width or 16 half-width
characters.
[Host number]:
Enter a host number within 99 half-width alphanumeric
characters and symbols.
[Host address]/[Host address2]:
Enter a host address within 30 half-width alphanumeric
characters and symbols.
4
Enter each item.
5
Press (Complete).
The entered host is saved.
6
Select the host and press .
The host is changed.
● Note that packet communication is not covered by the
Pake-Houdai service if a host of the packet communication
is set to other than [i-mode(UIM)].
Setting Whether to Use the Saved Data
for Flash Movies
Default Yes
You can set whether to use the saved data (P.158)
when you play back a Flash movie displayed on a site
or saved in the Screen Memo.
1
From the i-mode menu, select [i-mode setting] →
[Use phone info] and press .
2
Select [Yes]/[No] and press .
The Use phone info is set.
Disabling the Display of Graphics
Default ON
You can set whether to display graphics when
displaying sites or screen memos.
1
From the i-mode menu, select [i-mode setting] →
[Display img] and press .
2
Select [ON]/[OFF] and press .
The Set image display is set.
When set to [OFF], “
” is displayed instead of a graphic.
● Some graphics may not be displayed correctly even if the
Display img is [ON].
Displaying a Site Automatically with
the Correct Character Code
Default ON
You can set to identify the character code of a site
automatically.
1
From the i-mode menu, select [i-mode setting] →
[Auto detect.] and press .
2
Select [ON]/[OFF] and press .
The Auto detect. is set.
● Even if the Auto detect. is [ON], some sites may not be
displayed correctly.