Foma SO903i, Руководство пользователя

Страница: 331 / 384

328
Appendix/External Device Interface/Troubleshooting
Confirming the Reservation
1
From the Menu, select [Settings] → [Management] → [SW Update] and press .
The Security code screen appears.
2
Enter the Security code and press (OK).
Ａｌｒｅａｄｙ ｒｅｓｅｒｖｅｄ
ｆｏｒ
２００６／１２／１１ Ｍｏｎ
１：０５
ＯＫ
Ｃｈａｎｇｅ
Ｃａｎｃｅｌ
If the software update is already reserved, the reserved information
appears.
To change the reservation
Select [Change] → [OK]. The FOMA terminal connects to the server
and you can select another date/time.
To cancel the reservation
Select [Cancel] → [Yes] → [OK]. The FOMA terminal connects to the
server and cancels the reservation.
Protecting Your Mobile Phone from Harmful Data
<Scan function>
At first, update the pattern definitions to get the latest definitions.
You can detect information related to the data and programs obtained into the FOMA
terminal from an external source, such as data downloaded from a site or i-mode mail,
and delete data or end the start-up of application that can cause a trouble.

Use the pattern definitions for checking. Since the pattern definitions are upgraded every time a new problem
is discovered, be sure to update the definitions (P.329).

The scanning function provides explicit protection against intrusive data that causes mobile phone trouble while
you are viewing a website or receiving mail. Note that if the pattern definitions corresponding to each trouble
are not downloaded to the mobile phone, or if there are no pattern definitions corresponding to each trouble,
this function cannot prevent the trouble occurrences.

The contents of the pattern definitions vary depending on the model of your mobile phone. Note that the
distribution of pattern definitions for models released more than three years ago may be discontinued at our
company’s discretion.
Setting the Scanning Function
Default Scan function ・ Message scan : Valid
You can set whether to automatically check data and programs when they are executed.
1
From the Menu, select [Settings] → [Management] → [Scan function] → [Set scan]
and press .
Ｓｃａｎ ｆｕｎｃｔｉｏｎ
Ｖａｌｉｄ
Ｍｅｓｓａｇｅ ｓｃａｎ
Ｖａｌｉｄ
Ｓｅｔ ｓｃａｎ
[Scan function] : Set whether to enable the scanning function.
[Message scan] : Set whether to enable the scanning function for SMS when the
Scan function is set to [Valid].