Foma SO903i, Руководство пользователя

Страница: 171 / 384

168
i-mode/i-motion/i-Channel
Precautions on the use of FirstPass
● The packet communication charge is free when you
connect to the FirstPass Center.
● The packet communication performed when connecting
to a FirstPass-compatible site are covered by the Pake-
Houdai service. However, data communication with a PC
connected are not covered by the Pake-Houdai service.
● FirstPass is an electronic authentication service provided
by DoCoMo. Using FirstPass enables client authentication,
which is performed between the site and FOMA terminal
user by exchanging certificates and verifying the received
certificate of the other side for mutual authentication.
● FirstPass can be used for Internet communication from the
FOMA terminal as well as for Internet communication by
connecting the FOMA terminal to a PC. To use on a PC,
you must install the FirstPass PC software on the supplied
CD-ROM.
● When you request the user certificate to be issued,
carefully read the displayed “FirstPass Agreement” and
then make the request if you accept the terms.
●
You need to enter the PIN2 code in order to use the user
certificate (P.119).
You are liable for all operations performed after you enter
the PIN2 code. Therefore, exercise care to prevent the use
of your UIM or PIN2 code by others.
● If you have lost or stolen your UIM, you can invalidate your
user certificate at the “General Contact” numbers provided
on the backcover of this manual.
● DoCoMo shall have no liability for any content and
information provided by FirstPass-compatible sites. Any
problem must be resolved between you and the FirstPass-
compatible site.
● DoCoMo and the authentication company do not
guarantee the security for using FirstPass and SSL.
Therefore, you must use them at your own discretion and
responsibility.
Changing the Host for
Certificate Issue
<Select host>
Default ドコモ
※ Normally, you do not need to change the setting.
When you want a service other than FirstPass services,
you can set one host. Note that if you change the
setting, you cannot connect to the FirstPass Center.

You cannot set this function during i-mode connection.
1
From the i-mode menu, select [i-mode setting] →
[Select host] and press .
ドコモ
Ｓｅｌｅｃｔ ｈｏｓｔ
To edit the set host
Move the cursor to the set host and from the Function
menu, select [Edit] and enter the Security code. Edit
each item.
To restore the default host setting
From the Function menu, select [Reset], enter the
Security code, and select [Yes].
2
Press (Create).
The Security code screen appears.
3
Enter the Security code and press (OK).
Ｈｏｓｔ ｎａｍｅ
Ｈｏｓｔ ａｄｄｒｅｓｓ
Ｈｏｓｔ ｓｅｔｔｉｎｇ
[Host name]:
Enter a host name within 99 half-width alphanumeric
characters and symbols.
[Host address]:
Enter a host address within 100 half-width alphanumeric
characters and symbols.
4
Enter each item.
5
Press (Complete).
The entered host is saved.
6
Select a host and press .
The host is changed.