Foma P702i, Руководство пользователя

Страница: 98 / 478

95
Making/
Receivi
ng Vid
e
o-ph
one Call
s
Rem
ote Monitoring
1
Other ID List ( ) Do the following operations.
1
A video-phone call comes in from a stored phone number.
p The ring tone for remote monitoring sounds. (You cannot change the ring tone for remote monitoring.)
The ring tone sounds at the volume set for “Videophone” of “Ring volume”, but at “Level 2” if you have
set “Step”, “Level 1” or below.
p The illumination color for incoming remote monitoring calls is “Gradation”, and its illumination pattern is
“Standard”, regardless of the Illumination setting.
p
When a remote monitoring call comes in, “Open phone” is disabled.
p Even when remote monitoring is set, you can press or to take the video-phone call
before automatic answering and send the image through your camera to the other phone. If you press
, the video-phone call will start by sending the substitute image to the other party.
p If you press when a remote monitoring call comes in, the call will be cut and remote monitoring will not be done.
p To make a remote monitoring call, notify your caller ID and make a video-phone call.
p
If the caller does not notify his/her caller ID, remote monitoring will not be done and the call will be treated as an ordinary
incoming video-phone call.
2
The call is taken automatically after the ring time set for “Remote
monitoring”, and remote monitoring begins.
The camera setting switches to “ON” regardless of the setting for “Send camera image”, and the image
through the camera and sound will be sent. (You cannot switch to a substitute image.)
p The image through the caller’s camera appears on the display and the sound is played back from the
speaker.
p You cannot set voice-only remote monitoring.
p
During remote monitoring, the receiving end cannot operate anything other than pressing to end
remote monitoring.
Ring time You can set the time until remote monitoring starts after receiving a video-phone call.
Enter a ring time (seconds)
p Enter from “003” to “120” in three digits.
p Not to change a ring time, just press without entering a time.
p
You cannot set the same ring (response) time for Remote Monitoring, Automatic Answer and Record
Message. Set different time for each.
Set You can set whether to activate Remote Monitoring for when receiving video-phone calls from phone
numbers stored as “Other ID”.
ON . . . . . . . . . . . . . . Automatically answers video-phone calls from phone numbers stored as
“Other ID” to start remote monitoring after the set ring time. (You cannot
select “ON” when “Other ID” is not stored.)
OFF. . . . . . . . . . . . . . Performs usual answering operation even if video-phone calls come in
from phone numbers stored as “Other ID”.
p “ ” is displayed while this function is set to “ON”.
p You cannot set “ON” in Manner Mode. The message telling that the remote monitoring in Manner
Mode is disabled appears.
Function Menu of the Other ID List
Item Operations
Setting at purchase
5 seconds (when “Remote
monitoring” is set to “ON”)
Setting at purchase
OFF
Function menu Operations
Look-up address You can look up a phone number in the Phonebook, Dialed Calls, or Received Calls. (See page 230)
Delete this YES
Delete all YES
Information
<Delete this> <Delete all>
p If you delete all Other IDs, “Remote monitoring” is set to “OFF”.
Monitoring by Video-phone