Foma P702i, Руководство пользователя

Страница: 461 / 478

23
For packet communication, you can specify whether
you notify the access point of your caller ID (caller ID
notified/not notified). The caller ID is your important
information; so, take a great care to notify your caller ID.
You can use the AT command to specify “caller ID
notified/not notified” before dial-up connection.
You can specify “caller ID notified/not notified” with the
_ DGPIR command.
1
Start the communication software such as
“Hyper Terminal”.
p See page 21 for details on how to operate “Hyper Terminal”.
2
Use the _ DGPIR command (see page 35) to
specify “caller ID notified/not notified”.
p To automatically add “184 (not notified)” for outgoing or incoming
call, enter the following:
AT
_
DGPIR=1
p To automatically add “186 (notified)” for outgoing or incoming call,
enter the following:
AT
_
DGPIR=2
■
Specifying “caller ID notified/not notified” in dial-up network
Also by dial-up network setting, you can add “186 (notified)” or “184 (not
notified)” to each access point number.
When you specify “186 (notified)” or “184 (not notified)” using both the
_ DGPIR command and dial-up network setting, the caller ID is set as
follows:
p
To connect to mopera U or mopera, you need to notify the access point
of your caller ID.
Setting Caller ID Notified/Not Notified
Dial-up network
setting (cid = 3) “Caller ID notified /
not notified” with
_
DGPIR command
Caller ID notified /
not notified
_ 99 ___ 3# Not set Notified
Not notified Not notified
Notified Notified
184
_
99
___
3# Not set Not notified
(“184” specified in the dial-up
network has a priority)
Not notified
Notified
186 _ 99 ___ 3# Not set Notified
(“186” specified in the dial-up
network has a priority)
Not notified
Notified
3
Confirm that “OK” appears on the display.
1
“
スタート
(Start)” “
すべてのプログラム
(All
programs)” “
アクセサリ
(Accessories)”
“
通信
(Communications)” Open “
新しい接
続ウィザード
(New connection wizard)”
2
When the “ 新しい接続ウィザード (New
connection wizard)” screen appears, click “ 次
へ (Next)”.
3
Select “ インターネットに接続する (Connect to
the Internet)”, then click “ 次へ (Next)”.
4
Select “
接続を手動でセットアップする
(Manually set up the connection)”, then click
“
次へ
(Next)”.
5
Select “
ダイヤルアップモデムを使用して接続す
る
(Use a dial-up modem for connection)”,
then click “
次へ
(Next)”.
information
p
When using DoCoMo Internet access service mopera U or mopera, you
need to set your caller ID to “notified”.
p If the entered AT command is not displayed, enter “ATE1 ”.
Setting Dial-up Network for
Windows
®
XP