Foma P702i, Руководство пользователя

Страница: 457 / 478

19
Saving data into a file
From the menu, select “ ファイル (File)” → “ 上書き保存 (Overwrite
and save)” or “ 名前を付けて保存 (Rename and save)”; you can back
up the access point name (APN) information registered in the FOMA
phone and save the currently edited access point name (APN)
information.
Reading data from a file
From the menu, select “ ファイル (File)” → “ 開く (Open)”; you can
obtain the access point name (APN) saved in the personal
computer.
Reading access point name (APN) information
from the FOMA phone
Click “FOMA 端末から設定を取得 (Obtain the setting from the FOMA
phone)”; you can obtain the access point name (APN) information
from the FOMA phone.
Writing access point name (APN) information to
the FOMA phone
Click “FOMA 端末へ設定を書き込む (Write the setting to the FOMA
phone)”; you can write the displayed access point name (APN)
information to the FOMA phone.
Dial-up information creation function
Select an access point name you add or edit on the access point
name (APN) setting screen, then click “
ダイヤルアップ作成
(Create
dial-up information)”; you can create dial-up information for packet
communication. The FOMA phone setting writing confirmation
display then appears, then click “
はい
(Yes)”. After writing ends, the
“ パケット通信ダイヤルアップ作成画面 (packet communication
dial-up information creation screen)” appears.
Enter any access point name, then click “
アカウント・パスワードの
設定 (Specify account and password)”. (You can leave it blank for
mopera U or mopera.)
Enter the user name and password (select the authorized user for
Windows
®
XP and Windows
®
2000 Professional), then click “OK”. If
your Internet service provider instructs you to specify IP and DNS
information, click “
詳細情報の設定 (Set detailed information)”, and
register the required information. Then click “OK”.
After entering information, click “OK”. Dial-up information is created.
See page 11 for using mopera U or mopera.
See page 12 for using a provider other than mopera U or mopera.
information
p The access point name (APN) is information to be registered in the
FOMA phone, so if you connect another FOMA phone, you need to
register the access point name (APN) again.
p To continue using the access point name (APN) of the personal
computer, register the same access point name (APN) for the same cid
number in the FOMA phone.
The operation below explains how to set a connection
for packet communication without using the “FOMA PC
設定ソフト
(FOMA PC setup software)”.
The packet communication uses AT commands to carry
out the settings from a personal computer. To specify
settings, communication software to enter AT command
is required. “Hyper Terminal”, which is attached to
Windows
®
as the standard software, is used here for
explanation.
When using DoCoMo Internet access service mopera U
or mopera, you do not need to specify an access point
name (APN) (see page 21).
You can set “caller ID notified/not notified” (see page
23) as required. (You need to set “caller ID notified”
when using mopera U or mopera.)
<Packet communication setting flow using AT
commands>
To manually carry out the communication setting, you
need to specify a COM port number, which is assigned
to the “FOMA P702i” modem embedded after you install
the P702i communication setup file. The confirmation
method varies depending on the operating system of
your personal computer.
p When using DoCoMo Internet access service mopera U or mopera,
you need to specify no access point name (APN); therefore, you do
not need to confirm the modem.
Setting Dial-up Network
Setting Packet Communication
Confirm the COM port number (See page 19)
Start the communication software that enables the
entry of AT commands (See step 3 on page 21)
Set an access point name (APN)
(See step 7 on page 22)
Set “caller ID notified/not notified”
(See step 2 on page 23)
Set others (See page 32)
Exit the communication software
(See step 9 on page 22)
■ AT commands
p The AT commands are used to control a modem. The FOMA phone,
which conforms to the AT commands, supports some extended
commands and unique AT commands.
p By entering AT commands, you can carry out detailed setting for packet
communication and FOMA phone, and confirm (display) the setting
contents.
p If the AT commands you enter do not appear on the screen, enter
“ATE1 ”.
Confirming COM Port Number