Foma P702i, Руководство пользователя

Страница: 440 / 478

2
Two ways of connecting the FOMA phone to other
devices are available as follows:
Connect the FOMA phone to a personal computer
provided with the USB port using the FOMA USB Cable
(option). (See page 3)
This way of connection applies to all types of
communications such as packet communication, 64K
data communication, and data transfer.
p Set “USB mode setting” to “Communication mode”.
p You need to install the P702i communication setup files (driver)
before use.
Using infrared rays, you can send/receive data between
your FOMA phone and another FOMA phone, mobile
phone, or personal computer provided with the infrared
data exchange function.
This applies to data transfer only.
To use the Internet, you need to pay the charge for the
Internet service provider you use. Besides the FOMA
service fee, you need to directly pay this charge to the
Internet service provider. For details on the charge,
contact the Internet service provider you use.
You can use the DoCoMo Internet service, mopera U/
mopera. To use mopera U, subscription (charged) is
required. To use mopera, subscription and monthly
charge are not required.
The access points for the packet communication and
64K data communication differ. To use the packet
communication, connect to an access point for packet
communication. To use the 64K data communication,
connect to an access point which supports FOMA 64K
data communication or ISDN synchronized 64K.
p You cannot connect to the DoPa access point.
p You cannot connect to PHS 64K or 32K data communication access
point such as PIAFS.
Connecting FOMA phone to Other
Devices
Using FOMA USB Cable
Using Infrared Data Exchange
Notes for Using Data Communication
Charge of Internet service provider
Setting access point (Internet service
provider, etc.)
User certification (ID and password) may be required at
connection to some access points. In this case, enter
your ID and password on the communication software
(dial-up network). ID and password are specified by the
Internet service provider or network administrator of the
access point. For details, contact the provider or
administrator.
If you need FirstPass (user certificate), install the
FirstPass PC software from the attached CD-ROM and
do the setting.
See “FirstPassManual” (PDF format) in the
“FirstPassPCSoft” folder of the CD-ROM for details.
Adobe Reader (version 6.0 or higher is recommended) is
required to view “FirstPassManual” (PDF format). If it is
not installed in your personal computer, you can
download the latest version from the web page of Adobe
Systems Incorporated (communication charge is
applied separately).
For details, see the web page of Adobe Systems
Incorporated.
To carry out the communication using the FOMA phone,
the following conditions are required:
・
The personal computer to be used can use FOMA USB
Cable (option).
・ The PDA to be used should support FOMA packet
communication and 64K data communication.
・
Within the FOMA service area
・ For packet communication, the access point should
support packet communication of the FOMA.
・ For 64K data communication, the access point should
support the FOMA 64K data communication or ISDN
synchronized 64K.
Even when these conditions are satisfied, if the base
station is congested or the radio wave conditions are
bad, you may not carry out the communication.
About user authentication for accessing
network
About access authentication for using
browser
Conditions of packet communication and
64K data communication