FMS BKS309.W.M, Руководство по эксплуатации

Страница: 30 / 48

Operating Manual BKS309.W.M
22.02.2019 30
Direction of positive movement [LegthInc]
Description: This parameter determines the direction to which the displayed
value will increase.
Setting: [Left]
Description: The value increases as the sensor moves to the left.
Setting: [Right]
Description: The value increases as the sensor moves to the right.
Alignment of traverses [Traverse]
Description: This parameter determines the quantity and mounting position of
the installed traverses. The selected option also influences some
functions and the behavior of the control when you switch from
manual to automatic mode.
Setting: [none]
Description: There’s no traverse installed. You can also choose this setting if you
want to block the function of an installed traverse. The menu for
traverse parameters and functions will not be accessible with this
selection.
Setting: [Left]
Description: There is one traverse on the left side installed. Only this traverse will
be controllable via the panel. The search run [Detect] will start from
left to right if you switch to automatic mode.
Setting: [Right]
Description: There is one traverse on the left side installed. Only this traverse will
be controllable via the panel. The search run [Detect] will start from
right to left if you switch to automatic mode.
Setting: [L and R]
Description: There are two installed traverses on the system. Both are
controllable via the panel.
[IP Addr]
Description: This parameter defines the IP address of the controller. This is the
basic requirement to connect it to a network. You have to enter the
IP address in 4 separate blocks.
[IP Bl 1 to 4]
Range: 0 to 255 Default: 192.168.0.090
Increment: 1 Unit: [ - ]