FMS BKS309.W.M, Руководство по эксплуатации

Страница: 18 / 48

Operating Manual BKS309.W.M
22.02.2019 18
Key Function
+
Press both keys. The LED is on. The LCD indicates the actual
position of the actuator.
Approach the desired position.
After pressing briefly the LED stars flashing. The position can now be
stored.
Stores the actual position as [Home Pos]
Stores the actual position as [Max Pos]
Stores the actual position as [CentrPos]
If the operation was successful, the controller will confirm with "Safe
Pos done" in the display.
If the "Safe Pos failed" is shown in the display the position has not
been stored. This message indicates that the different position do not
correspond to each other. This may happen if e.g. the value for the
desired home position exceeds the value for the center position. The
positions always have to be in line. [Home Pos] is the smallest value,
[Max Pos] is the highest value and the value for [CentrPos] has to be
some in between.
6.4 Selection of the guiding logics
You can choose from 3 different guiding logics. The selected logic and the
configuration of the installed traverses influence the functions of the traverses.
Selected
logic Installed
traverse(s) Reference run of
traverse
Edge
detect
Retract from
web
left right left right left right
left left X X X
left right X X
left left & right X X X X X
right left X X
right right X X X
right left & right X X X X X
center left X X X
center right X X X
center left & right X X X X X X
Table 2: Guiding logics