FMS BKS309.W.M, Руководство по эксплуатации

Страница: 35 / 48

Operating Manual BKS309.W.M
22.02.2019 35
Manually moving a single sensor, display of relative dimensions [Sens L  ] and[Sens R  ]
Description: This function will move the selected sensor.
The display will show the distance from one sensor to the other
sensor. If you have not set a zero point the indicated value refers to
the home position of the selected sensor.
Requirement: Two traverses have to be configured and the zero point has to be
defined.
Manually moving two sensors, display of absolute dimensions [Sens L/r] and [Sens R/]
Description: This function will move both sensors in parallel.
The display will show the distance from the sensor "in capital letter"
to the zero point. [SensL/r] will show the distance from the left
sensor to the zero point.
If you have not set a zero point the indicated value refers to the
home position of the selected sensor.
Requirement: Two traverses have to be configured and the zero point has to be
defined.
Safe and approach a point along the traverses [Safe Pos] and [Goto Pos]
Description: After you have manually positioned one or both sensors you can
store the current positions in the parameter [Safe Pos]. The
parameter [Goto Pos] allows you to approach the stored position at
any time.
Set a zero point [SetZerPR] and [SetZerPL]
Description: This parameter allows you to define a zero point for the right
[SetZerR] and left [SetZerL] sensor. With the setup of this zero point
you will be able to use the values of the sensor position as absolute
dimension. This will be of advantage if you have installed 2 traverses
or during the setup procedure your machine.
Requirement: min. one traverse has to be configured and the zero point has to be
defined. If you have installed 2 traverses the zero point of both
traverses has to be identical. Refer to page 19.
11 Restore default settings
You can restore the default settings of the controller with the operating parameter
[Default]. Refer to page 23.