FMS BKS309.W.M, Руководство по эксплуатации, Страница: 14 / 48

Operating Manual BKS309.W.M
22.02.2019 14
5.4 Initial start-up and basic settings
After applying the correct power (24VDC) the system is in operation. Before putting
the system into operation, you have to set some basic parameters.
Please clarify the following points:
•
Steering frame / actuator
o
Steering frames of the FMS webMASTER and webDIRECTOR series
are detected automatically
o
Actuators of the FMS winderGLIDE series have to be configured
manually. You have to enter the mounting position of the actuator.
•
Quantity and type of the applied motorized traverses
• Desired type of control (edge, center, line guiding)
•
Units and language displayed on the LCD
• Requirements for the optional relays outputs or digital inputs if you wish to
connect the controller to a superordinated control
• Parameters for an optional integration into your network
After the initial start-up the controller is automatically set to manual mode.
Set language – operating parameter
Key Function
> 3 Sec
Enter the menu for changing the operating parameters
Scroll through the list of parameters to the menu point [Sprache] or
[Language]
Changing the parameter: the selected parameter name starts flashing. This
means that you can now change the value of the parameter.
Change the parameter value as desired
Confirm the changes: The selected parameter name stops flashing.
> 3 Sec
Leave the menu for changing the operating parameters. The LED above the
key is now off.
To set the other basic parameters proceed as described above:
•
Contrast of LCD [Contrast]
• Mounting side of motorized traverse [Traverse]
•
Type of motorized traverse [TvTyp R] and [TvTyp L]