FMS BKS309.W.M, Руководство по эксплуатации

Страница: 34 / 48

Operating Manual BKS309.W.M
22.02.2019 34
Description: Maximum stroke of 200mm (7.87in).
Type: [D.3.300] or [D.6.300]
Description: Maximum stroke of 300mm (11.81in).
Warning for BKS.D.4
If you are using an FMS winderGLIDE BKS.D.4 you have to select the parameter for
the BKS.D.3 with the corresponding stroke of 125 or 200mm.
10 Traverse parameters and functions
Retract the sensors from the web [Retract]
Description: This function will automatically retract all configured traverses. The
home position will be approached.
Automatic web detection [Detect]
Description: This function will start to move all configured traverses in direction of
the web. Sensor signal is permanently monitored during this process.
The detection is stopped as soon as the web is detected in the center
of the sensor area. If the web moves during the detection mode the
sensors will follow that movement. After 3 min. this function is
automatically determined.
Approach the home position [RefRun]
Description: You will need to trigger this function after the initial setup of the
system. It is use to initialize the measuring system of the traverses
and to set the reference point for the future display of distance
values in the LCD.
As soon as you change the configuration of the installed traverses
(qty., stroke, etc.) the system will ask you to trigger this function
again.
Manually moving a single sensor, display of absolute dimensions [Sens L] and [Sens R]
Description: This function will move the selected sensor.
The display will show the distance from the sensor to the zero point.
If you have not set a zero point the indicated value refers to the
home position of the sensor. Refer to page 19.