CHARACTERISTICS
1 - 1
CHARACTERISTICS
SPECIFICATION
ADDITIONAL
INFORMATION
1 CHARACTERISTICS
A. Performance Characteristics
-
Properties expressed in numerical values with tolerances, ranges, or limits
stated, are guaranteed by the manufacturer.
-
Properties expressed in numerical values without tolerances, ranges, or limits
stated, represent the characteristics of an average instrument.
-
This specification is valid if the temperature has not changed more than + or -
5
°
C since the last AUTO CAL, the probe is of the same type as delivered with
the instrument, and if the average factor is 8.
-
For definitions of terms, reference is made to IEC Publication 351-1, 359.
B. Safety Characteristics
This instrument is designed for indoor use only. It has been designed and tested
for measurements on 150 V rms Category II, Pollution Degree 2 in accordance
with the following standards EN61010-1 (1993)(IEC 1010-1), ANSI/ISA S82.01-
1994, CAN/CSA-C22.2 No.1010.1-92, UL3111-1. Installation Category II refers to
local level, which is applicable for appliances, and portable equipment. The
apparatus has been supplied in a safe condition. This manual contains
information and warnings which must be followed by the user to ensure safe
operation and to keep the instrument in safe condition. The instrument has been
designed for indoor use. It may occasionally be subjected to temperatures
b5
°
C and 10
°
C without degradation of its safety.
C. General Characteristics
-
Overall dimensions:
•
Height (without feet)
: 139 mm ( 5.5 in)
•
Width (without handle)
: 341 mm (13.5 in)
•
Length (without handle and front cover)
: 481 mm (19 in)