Maintenance and Inspection Procedures Manual
Type:
CT
Series:
CTLS
LSA
Page: 5-1
AF 04800001
Revision No. 3
Date: 14 Sep 2008
5 Engine
5.1 Engine Systems and Accessories
Engine systems and accessories described in this manual, such as the Carburetor Heat system, are
inspected and repaired as line maintenance items. These items may require task specific training.
Some engine installation components, such as the Firewall and the Engine mount, if in need of repair, are
Heavy maintenance items.
Besides task specific training, instructions and authorizations on a case by case basis may be required.
Contact Flight Design for details.
5.2 Rotax 912ULS Engine
For engine inspection and maintenance refer to the valid original Rotax manuals. Initial manuals are
supplied with the aircraft:
•
Operator’s Manual for all versions of ROTAX 912;
•
Maintenance Manual (Line Maintenance ) for ROTAX Engine Type 912 Series;
•
Maintenance Manual II (Heavy-Maintenance) for ROTAX Engine Type 912 Series.
Before performing any inspection or maintenance task on the aircraft check these manuals for available
updates through ROTAX.
Engine removal, installation & replacement can only be done of Flight Design USA authorized
service center.
Important: Rotax training may be required to perform maintenance on the engine