Maintenance and Inspection Procedures Manual
Type:
CT
Series:
CTLS
LSA
Page: 3-4
AF 04800001
Revision No. 3
Date: 14 Sep 2008
3.3 Post-Run-up
CT Inspection and/or Required Maintenance Checklist
100h
our
Annual
Minimum Level
of Certification
Engine cowling.
Remove engine cowling.
RLSA-M
Engine oil.
Check the level of oil and follow the Operator’s Manual for
all versions of ROTAX 912.
RLSA-M
Exterior lights.
Check operation of landing lights (if applicable),
position lights, and strobe lights.
RLSA-M
Interior lights
. Check operation of interior lights (if applicable).
RLSA-M
Flight controls.
Check for smooth operation of all flight controls with
flaps in retracted and extended positions. Leave flaps in the full up
position when checks are completed.
RLSA-M
Door apertures protection.
Check protection for wearing and flanges
for cracks.
Owner/Pilot
Rudder neutral position system.
Check operation.
RLSA-M
Environmental Control System (ECS)
. Check operation of the door
window vents.
Owner/Pilot
Trim tab.
Check trim tab position and indicator reading.
RLSA-M
Brake System.
Check wheel chocks and disks for wearing. Check the
level of fluid in the hydraulic system. Inspect the protection PVC hoses
in the places where brake lines go through the fuselage skin
(see p. 4-32 - Chapter 4.2.3.5.2).
Owner/Pilot
Battery.
Fully charge and clean up the battery surface and cables.
Check the battery for reliable contact with the cables.
Owner/Pilot
Fairings, access panels, seats, carpets, covers, and spinner.
Remove for inspection to ensure access. Check for missing or
unscrewed bolts and nuts.
RLSA-M