Maintenance and Inspection Procedures Manual
Type:
CT
Series:
CTLS
LSA
Page: 9-3
AF 04800001
Revision No. 3
Date: 14 Sep 2008
9.3.13 Transponder Garmin installation
Other than for regulatory periodic functional checks, maintenance of the GTX 327 is "on condition" only.
Refer to the GTX 327 Maintenance Manual. Periodic maintenance of the GTX 327 is not required.
9.3.14 Altitude Encoder ACK A30 (Classic) or Dynon (Advanced)
The model A-30 Altitude Encoder requires no periodical maintenance. Maintenance should be preformed
on condition.
9.3.15 GPS Garmin 496
The GPSMAP 496 is constructed of high quality materials and does not require user maintenance other
than cleaning. Clean the unit using a cloth dampened with a mild detergent solution and then wipe dry.
Avoid chemical cleaners and solvents that may damage plastic components.
9.3.16 ELT Ameriking AK450
To insure continued reliability of your ELT, it must be inspected for damage and wear which could be
caused by age. exposed elements, vibrations, etc.
The inspections
must be performed a minimum of one time each 12 months.
The Ameri-King Corp. Model AK-450 ELT is designed to use only Duracell MN1300 Alkaline Batteries
which are dated by the Manufacturer.
Battery replacement is required upon reaching the date marked upon each cell. All cells must be replaced
at the same time and all cells must have the same expiration date.
9.3.17 Intercom PM 3000 A with aux music input and connection to GPS
Audio
The PM3000 is considered an on condition maintenance item. During normal operation it is checked on to
each flight by the pilot.It is a good practice to periodically check the unit to make sure it is securely
fastened in its location, and that the wiring harness is not chafed or pinched, and remains secure. All
panel jacks should be checked at each periodic inspection to ensure that they are tight and not in contact
with other items behind the instrument panel.