Maintenance and Inspection Procedures Manual
Type:
CT
Series:
CTLS
LSA
Page: 5-2
AF 04800001
Revision No. 3
Date: 14 Sep 2008
5.3 Carb Heat Control
To inspect and eliminate damages of the ventilation system one person is required.
5.3.1 Tools Required
Hex-nut wrench 3 (or screwdriver)
1 pcs
Screwdriver
5
mm
1
pcs
Cross-screwdriver or wrench with header 7
1 pcs
Knife
1 pcs
5.3.2 Materials Required
Steel rope 1.5 mm
39.4 in. / 1 m
Air filter
1 pcs
Wraps
6
pcs
5.3.3 Type of Maintenance
Line
5.3.4 Minimum Level of Certification
Repairman, Light Sport Aircraft-Maintenance (RLSA-M) or higher.
5.3.5 General
Remove upper and lower cowling to ensure good access to the firewall forward area. Set the plane’s
parking brake on. Put wheel chocks under the main wheels to prevent rolling.
5.3.6 Inspection of Carburetor Heater Control
a. Inspect air filter (pos. 1, Fig.1) for conditions. Replace if necessary.
To replace the filter inside the air filter box (pos. 2, Fig.1) and the hose do the following:
Fig. 1