Maintenance and Inspection Procedures Manual
Type:
CT
Series:
CTLS
LSA
Page: 4-24
AF 04800001
Revision No. 3
Date: 14 Sep 2008
4.2.2.8 Main
Gear
Struts
Removal and Installation
4.2.2.8.1 Type of Maintenance
Line
4.2.2.8.2 Minimum Level of Certification
Repairman, Light Sport Aircraft-Maintenance (RLSA-M) or higher.
Flight Design task specific training required.
4.2.2.8.3 Procedure
1. Take out the seats.
2. Set an aircraft on a locating block.
3. Detach a wheel (refer to section 3.3.2.7).
4. Detach the landing gear fairing KF 32100020 (Fig. 6, item 1).
5. In order to detach the support KF32100044 (Fig. 7, item 4), unscrew 2 bolts KF32100042 M6 x
33 and 2 self-locking nuts C9996334 (Fig. 7, items 1 & 2).
Fig. 6
6. Unscrew 2 bolts KF32100043 M6 x 85 and 2 self-locking nuts C9996334 (Fig. 7, items 1 & 2) at
the top ends.
Fig. 7
7. Detach the main gear leg (Fig. 6, item 3).
8. Check supports, bolts and gear box (Fig. 7 item 3) for cracks.
