Explanation of symbols and instructions for safe work
Life-threathening danger from electric shock
Leave the introduction of electrical connection to an
authorized service technician. Follow the connection
scheme.
Before all works: disconnect the electric power supply.
Secure youself from accidental turning on.
Do not install this device in wet rooms.
Inspection / maintenance
Recommendation for the user: Make a maintenance
contract with an authorized service centre, that will
perform annual maintenance and control checks.
The user is responsible for the safety and
environmental acceptability of the installation.
Follow the safety instructions for safe work which are to b
found in the chapter
‘Cleaning and maintenance’
.
Original spare parts
No liability can be claimed for damages arising because of
the spare parts which are not supplied by the manufacturer.
Use only original spare parts.
Material damages from freezing
In the event of a risk of freezing, drain the water from the
boiler, tank and pipes of the heating system. The risk of
freezing does not exist only when the entire installation
is dry.
Instructions for service technicians/centres
Inform the users about the operating mode of the device and
maintenance.
Inform the users that they must not make any changes
or repairs on their own.
Warn the users that children without adult supervision
should not be kept near the heating installation.
Fill in and submit the “Putting into operation” and
“Take-over Minutes” contained in this document.
Hand over the technical documentation to the user.
Disposal into waste
Dispose of packaging in an environmentally acceptable
manner.
Dispose of the device in an environmentally acceptable
manner at an authorized place.
Cleaning
Clean the device with a damp cloth from the outside.
