Explanation of symbols and instructions for safe work
1.
Explanation of symbols and instructions for safe work
1.1
Explanation of symbols
1.2
Instructions for safe work
Instructions and warnings
Warnings are marked with a gray triangle in
the text, and are framed.
The risk of electric shock is indicated by the symbol
of lightning in the triangle, and framed.
Signal words at the beginning of the safety note indicate the
manner and severity of the consequences that threaten
unless there are applied measures to prevent danger.
•
NOTE
means that minor material damages may
occur.
•
CAUTION
means that minor or medium-sized injuries
may occur.
•
WARNING
means that serious injuries can occur.
•
DANGER
means that serious injuries can occur.
Important information
Important information, which does not pose a
danger to people or things, is indicated by the
symbol shown in the text below.
They are limited by lines, above and below the text.
Other
symbols
Table
1
General safety instructions
Failure to follow the safety instructions can result in serious
injuries - as well as to deadly consequences, material
damages and damage to the environment.
Provide a professional examination of the electrical
installation before installing the device.
All electrical operations must be carried out by a person
authorized to carry out electrical operations, according to
the relevant regulations.
Ensure that putting into operation, as well as
maintenance and repairs are carried out by an
authorized service centre.
Provide technical reception of the installation in
accordance with the relevant regulations.
Danger due to not respecting one's own safety in case of
an emergency, eg. in the event of fire.
Never expose yourself to life threatening situations. Your
own safety is always a priority.
Damage caused by wrong handling
Handling errors can lead to injury of persons and/or damage
to the installation.
Make sure that only people who know how to handle
properly the device have access to it.
Installation and putting into operation, as well as
maintenance and repair, must only be carried out
by an authorized service centre with appropriate
authorization for electrical works.
Installation and putting into operation
Leave the installation of the device only to an
authorized service centre.
Always start the boiler only if the installation is at an
appropriate pressure and the operating pressure is correct. Do
not close the safety valves in any case in order to avoid
damage caused by too high pressure. During heating,
the water can leak on the safety valve of the hot water
circuit and hot water pipe.
Install the device only in a room where freezing cannot
occur.
Do not store flammable materials or liquids near the
device.
Keep a safe distance according to applicable regulations.
Symbol Meaning
Step of the action
Guidance to other places in the document or to other
documents.
•
Listing/Entry from the list
–
Listing/Entry from the list (2.)
