This device is equipped with three (3) sets of entries for
introduction of power cables.
I
set
of entries for introduction of power cables
(main
set) is located on the bottom side of the device. They are
located on the bottom panel of the device in the rear left
corner. (see image 6) They are intended for connection of
the device when the power cable comes from the bottom
side of the boiler.
II
set
of entries for introduction of power cables
is
located on the upper side of the boiler and also in the
rear left corner (see image 6). They are intended for
connection of the device when the power cable comes from
the upper side of the device.
.
III
set
of entries for introduction of power cables
is
placed from the inside of the device on its
rear side, and it is intended when cables in
the wall are prepared on time and when the
place for the boiler is prepared. They allow the
power cable to directly enter from the wall into the
boiler. When the front cover is removed, in the bottom left
side can be seen two openings of dimensions of 28 mm
and placed one above the other. This way of connecting
provides only aesthetic function because the cables
are not visible. (see image 6).
