Putting into operation
6.
Putting into operation
After completing the works described below, complete the
report on the putting into operation (chapter 6.3).
6.2
First putting into operation
NOTE:
Material damages caused by
6.1
Before putting into operation
NOTE:
Material damages caused by
unprofessional handling!
Putting into operation without sufficient amount
of water destroys the device.
Always switch on the boiler and use it only if it has
enough water.
The boiler must work with a minimum pressure of
0.8 bar.
improper handling
!
Inform the client/user of the device about
handling with it.
Before first putting into operation, check that the heating
installation is filled with water and air-discharged.
Turn on the main switch (on the bottom side of the device)
All parameters of the heating system and the device itself
will appear on the display
The device is factory set to operate in the heating mode
(preparation of sanitary water is swithched off). Set values:
temperature of 10
°C and power of 0 kW.
Prior to putting into operation, check that the following
elements and connections are properly connected and function
correctly:
• Impermeability of the heating installation,
Only the value of pressure in the installation will be the
one you set on the display when filling the installation with
water.
• all pipes and armature,
• all electrical connectors.
6.3
Record on putting into operation
Putting into operation
Page
Measures/values
Notes
1.
Boiler type
2.
Serial no.
3.
Set thermostatic regulation
4.
Fill and discharge the air from the heating installation and
check the impermeability of all connectors.
16
5.
Establishing operating pressure
• Check the pressure of the expansion container
__________
bar
__________
bar
6.
Tested security devices
16
7.
Set the electrical connector according to local
regulations
16
8.
Check of the functions of the device
16
9.
Users informed, technical documentation submitted
10.
Confirmation of professional putting into operation
Seal of service technician / signature / date
Table:
Record on putting into operation