Electrical connector
5.
Electrical connector
DANGER:
Life danger from electric shock!
Perform electrical works only with the
necessary qualifications.
Before opening the device, disconnect the
network voltage from all poles and ensure
that it is not activated again.
Follow the regulations for installation.
When connecting the boiler to the electrical
installation, take care of the connection scheme
and connection plans. Observe required cable
cross-sections and fuse power outside the boiler.
This device
is intended for connection to a
three-phase network
(3x400/230)
5.1
Position of the entry for the introduction of the power cable
I set CS / II set CS / III set CS
– Position of the first set of Cable holders
Image number
6
Display of positions of entries of cables on the boiler
