Installation of the device
4.3
Disassemble the front cover of the boiler
4.4
Installation of the boiler
The shell of the boiler can be removed for easy handling and
installation.
Unscrew the screws on the top
cover.
Unscrew the screws on the bottom
cover.
With a slight pulling towards you, disassemble the front
shell of the boiler.
NOTE:
Material damages caused by
improper installation onto wall!
Suitable material for fixing should be used
This chapter describes installation of the boiler on the wall.
Draw the positions of openings for drilling for the installation kit
according to the dimensions shown in Image 2.
Take care when marking the openings for the installation
in order to allow the boiler to stand vertically.
Drill the holes in the wall with an adequate drill.
In the drilled holes, place the plastic anchors that are part
of the package of the device (or the anchors that are
adequate for some non-standard type of wall).
Then screw in the bolts that are supplied together with the
anchors (or some other) so that they stick out of the wall
min 5mm and maximum 10mm.
Carefully attach the device to the wall, make sure that the
boiler is installed vertically.
Fix the boiler from the inside with the nuts from the
installation kit.
Image number
4
Opening of the boiler (disassembling of the front shell)
